Clean Rooms / Pharmaceuticals / Decontamination Chambers

Alorair Dehumidifiers and Air Scrubbers can give a quick, simple and long lasting solution to cleanliness, and humidity control in these critical areas.

For Clean Rooms for producing Pharmaceutical drugs a stable environment is critical to ensure each tablet is as good as the last. Too much or too little humidity can effect the end result. All of out dehumidifiers have their own  built in Relative Humidity Sensor to which it works from. 

The Sentinel Range of Dehumidifiers can be wall mounted or ceiling hung to keep them out of the way whilst circulating and dehumidifying the air. The HD55HDi90 units can be remotely controlled via cat 5 cable to a wall mounted panel. The units are also quiet in running allowing for easy communication.

A number of different filters can be added to the Sentinel Units from the HEPA filter to the Activated Carbon Filter (it comes with the Standard G3 filter).

Remote Controller and Cable.PNG

Filters and Hanging Systems can be found in the Accessories Section under the SHOP heading.


For Larger rooms we will soon have the Sentinel HDi120, this will be the largest of the sentinel units, and looks like the others - Coming early 2021. All Sentinel Units can be ducted from (the expelled dryer air) allowing for use of a blown air if required for targeted drying should this be a requirement at all. 

Alternative to this would be the Storm Elite 125L unit which can be easily wheeled and positioned around the cleanroom, see image - red unit.

For controlling the air quality we have the Cleanshield HEPA 550 Air Scrubber, this is a portable unit which can also be placed to provide either cleaning via extraction or by pushing in clean air into a clean room environment creating positive pressure room.

In the first case as per the picture to the right the unit is used for removing any airborne particles after a cleaning process has happened or as part of a changing room, the air is sucked out through the air scrubber cleaning it as it passes the pre-filter, HEPA filter and Activated Carbon Filter.

The Picture shows it attached to a Sheerspeed Shelter and they have added the additional duct fixing for the Cleanshield HEPA 550 Air Scrubber.

Clean Room design.JPG

When using the Cleanshield HEPA 550 Air Scrubber as a positive pressure air scrubber the set up is different, the dirty air is drawn into the machine and cleaned and then pumped out of the machine via ducting into the "Clean Room", the additional air in the clean room creates a positive pressure in that room so anyone entering the room will not be able to drag dirty air in as when they open the door the pressure in the room will push the air out and not allow air to come into the room (for a limited time - door should not be left open!!). The Cleanshield HEPA 550 Air Scrubber has a variable speed control and also a pressure sensitive function showing when the HEPA / Activated Carbon filter needs to be changed.

The Cleanshield HEPA 550 Air Scrubber filters are easy to replace (the Pre Filter and the Combined HEPA and Carbon Filter). the ducting is easy to attach, the unit is easy to use and has variable speed control, combined with a filter replacement light - hopefully the right tool for you! 

Used in either removing particles from a sealed room or tent or ensuring clean air into a "clean room" environment the Cleanshield HEPA 550 Air Scrubber is a highly cost effective piece of equipment - please enquire about one today.

01423 341940

©2018 by Alorair Solutions UK Ltd. Proudly created with